Do roofers do soffits and fascias?

Yes, many roofing contractors carry out fascia and soffit work as a core part of their services. These elements sit directly below the roof covering and are closely related to overall roofing health. Some roofers specialise in the roof covering itself and refer eaves work to a dedicated installer, but the two trades overlap considerably. This post covers what to expect, what it costs, and the most common problems these elements develop.

Do Roofers Replace Soffits and Fascias?

Many roofing companies include fascias, soffits, and guttering within their service offering, particularly as these jobs naturally arise alongside roof repairs and replacement. When a roofer replacing a roof notices that the fascia boards are rotten or the soffits are crumbling, it makes sense to address them in the same visit. Most reputable roofing businesses are set up to do this.

Some specialist fascia and soffit installers work independently and focus exclusively on this type of work. Both routes can deliver a good result. The key is making sure whoever you hire has experience with uPVC or timber eaves installations, has proper insurance, and is happy to guarantee their workmanship. Ask to see examples of previous work and check reviews before committing.

How Much Does It Cost to Replace Fascias and Soffits?

The cost depends on property size and whether guttering is being replaced at the same time. For a typical semi-detached house, a full fascia, soffit, and guttering package using uPVC runs from around £1,200 to £2,500. Larger detached properties can cost £2,500 to £4,000 or more. In London and the South East, add a regional premium on top of these figures.

Replacing fascias alone, where soffits and guttering are in acceptable condition, is possible but less common. The access cost, whether via ladder or scaffold, is a fixed element regardless of whether one or all three components are being replaced. Doing everything together is always more economical per linear metre than coming back separately for each element.

Need some fascia, soffit and guttering support? Speak with a member of our professional team here

What Are the Common Problems With Soffits and Fascias?

Rot is by far the most common problem with timber fascias and soffits, particularly on properties built before the widespread adoption of uPVC in the 1990s. Once paint maintenance is neglected, moisture gets into the wood and rot follows, spreading from one section to adjacent boards and eventually into the structural rafter feet if left long enough.

Other frequent problems include bird or insect infestation through gaps in ageing boards, poorly fitted or disconnected guttering brackets, and the downstream consequences of blocked gutters, where overflowing water saturates the eaves and accelerates any existing rot. On properties where fascia board replacement has been deferred, rot can spread back to the rafter feet, which becomes a structural concern.

How Long Do Fascias and Soffits Last?

uPVC fascias and soffits typically last 20 to 40 years in good condition without requiring any maintenance beyond occasional cleaning. They do not rot, warp, or need repainting, which is why they have largely replaced timber in domestic construction since the 1990s. Colour fade can occur over many years on south-facing elevations, but this is cosmetic rather than a performance issue.

Timber fascias and soffits, if well maintained with regular painting every 5 to 8 years, can also last for decades. However, if painting is neglected, they can deteriorate quite rapidly once moisture gets into the wood. The painting cycle is an ongoing cost and commitment that uPVC eliminates entirely, which is why most homeowners opt for uPVC when replacing timber boards.

Whether you use a specialist or a roofer with eaves experience, getting fascias, soffits, and guttering done together is the most practical and economical approach. Address them before rot spreads to the structural timbers, and opt for uPVC if longevity and low maintenance are priorities. A well-done eaves package should need no attention for the next couple of decades.

Need some fascia, soffit and guttering support? Speak with a member of our professional team here

Frequently Asked Questions

Do roofers do soffits and fascias?

Many do, yes. Fascias, soffits, and guttering are closely related to roofing work and many roofing companies include them in their services. Some specialist eaves installers focus on this work exclusively.

Does a roofer replace soffits?

Yes, many roofing contractors carry out soffit replacement as part of a broader eaves job, particularly when working alongside a roof repair or replacement. It is always worth asking your roofer to assess the eaves condition while on site.

How much does it cost to do fascias and soffits?

For a standard semi-detached house, a full uPVC fascia, soffit, and guttering package typically costs £1,200 to £2,500. Larger properties and London pricing sit towards the higher end.

What is the average cost to replace soffit and fascia?

Between £1,200 and £2,500 for a semi-detached house when done as a package including guttering. The per-linear-metre cost comes down when all three elements are done together rather than separately.

What are the common problems with soffit and fascia?

Rot in timber boards is the most common issue, followed by gaps allowing bird and insect access, failed guttering brackets, and damp damage from overflowing gutters saturating the eaves.

How do I know if my fascias need replacing?

Signs include visible rot, crumbling or peeling paint, gaps between boards, evidence of birds nesting in the eaves, and gutters pulling away from the fascia. A ground-level inspection with binoculars gives a reasonable initial view.

Can rotten fascias affect my roof?

Yes. If rot spreads from the fascia into the rafter feet it becomes a structural issue. Replacing rotted rafter feet requires a roofer and is more involved and expensive than replacing sound fascia boards.

Is it better to repair or replace timber fascias?

Small areas of localised rot can sometimes be filled and repaired to extend board life. Widespread rot is almost always better replaced, and replacing with uPVC eliminates the repainting cycle for the future.

What colour uPVC fascias should I choose?

White remains the most popular choice and suits most property styles. Anthracite grey and black have grown in popularity on modern homes. Brown is common for properties with brick or stone finishes. Colour choice does not affect performance.

Do I need scaffolding for fascia and soffit replacement?

For standard two-storey houses, ladder access is often sufficient for an experienced installer. For taller properties or where access is difficult, a scaffold or tower platform may be needed. Confirm this in the quote.

Can I get fascias and soffits on finance?

Some installers offer payment plans or work with finance providers. It is worth asking when collecting quotes. A home improvement loan from your bank can spread the cost at a better rate than a credit card.

Do new fascias include guttering?

Not automatically, but most installers include it as part of the package since the guttering must be removed to access the fascia anyway. Always confirm what is included in the quote.

How long does fascia and soffit replacement take?

For a standard semi-detached house, a full eaves package can usually be completed in one to two days by a two-person team. Larger properties or those requiring scaffolding take longer.

Do uPVC fascias need painting?

No. One of the key advantages of uPVC is that it requires no painting or staining. An occasional wash to remove algae or dirt is all that is needed to keep them looking presentable.